设置PC为FTP Server
在PC上运行FTP Server程序（以wftpd32为例介绍），依次选择菜单“Security”->“Uers/rights”
备份系统软件、配置文件和补丁文件
登陆交换机
交换机上的FTP操作命令同在普通PC机上DOS下操作命令相同
假设FTP Server的IP地址为192.168.70.7 用户名为zzj 密码为zzj
<Core-A>ftp 192.168.70.7 Trying 192.168.70.7 ... Press CTRL+K to abort Connected to 192.168.70.7. 220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user User(192.168.70.7:(none)):zzj 331 Give me your password, please Enter password: 230 Logged in successfully 备份软件到本地ftp服务器 [ftp]put S5700EI-V200R003C00SPC300.cc S5700EI-V200R003C00SPC300.cc 下载ftp服务器上的软件包到交换机上 [ftp]get S5700EI-V200R005C00SPC500.cc 指定设备启动时加载的系统软件 <Quidway> startup system-software S5700EI- V200R005C00SPC500.cc 指定设备启动时加载的补丁文件 <Quidway> startup patch S5700EI-V200R005SPH001.pat
<Quidway> reboot
Info: The system is now comparing the configuration, please wait.
Warning: The configuration has been modified, and it will be saved to the next s
tartup saved-configuration file flash:/105_xu.cfg. Continue? [Y/N]:y
Now saving the current configuration to the slot 0....
Save the configuration successfully.
Info: If want to reboot with saving diagnostic information, input 'N' and then e
xecute 'reboot save diagnostic-information'.
System will reboot! Continue?[Y/N]:y
Info: System is rebooting, please wait.
----结束
未经允许不得转载：华为交换机系统补丁升级示例（FTP）
发表评论