设置PC为FTP Server

在PC上运行FTP Server程序（以wftpd32为例介绍），依次选择菜单“Security”->“Uers/rights”

备份系统软件、配置文件和补丁文件

登陆交换机

交换机上的FTP操作命令同在普通PC机上DOS下操作命令相同

假设FTP Server的IP地址为192.168.70.7 用户名为zzj 密码为zzj

<Core-A>ftp 192.168.70.7

Trying 192.168.70.7 ...

Press CTRL+K to abort

Connected to 192.168.70.7.

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user

User(192.168.70.7:(none)):zzj

331 Give me your password, please

Enter password:

230 Logged in successfully



备份软件到本地ftp服务器

[ftp]put S5700EI-V200R003C00SPC300.cc  S5700EI-V200R003C00SPC300.cc



下载ftp服务器上的软件包到交换机上

[ftp]get S5700EI-V200R005C00SPC500.cc



指定设备启动时加载的系统软件 

<Quidway> startup system-software S5700EI- V200R005C00SPC500.cc



指定设备启动时加载的补丁文件 

<Quidway> startup patch S5700EI-V200R005SPH001.pat

<Quidway> reboot

Info: The system is now comparing the configuration, please wait.              

Warning: The configuration has been modified, and it will be saved to the next s

tartup saved-configuration file flash:/105_xu.cfg. Continue? [Y/N]:y           

Now saving the current configuration to the slot 0....                         

Save the configuration successfully.                                           

Info: If want to reboot with saving diagnostic information, input 'N' and then e

xecute 'reboot save diagnostic-information'.                                   

System will reboot! Continue?[Y/N]:y                                           

Info: System is rebooting, please wait.

----结束